IEC 0.6/1kv 2*50mm2 XLPE Insulation PVC Sheathed Power Cable

Product Details
Customization: Available
Warranty: 12 Months
Trade Terms: Fob CFR CIF
Still deciding? Get samples of US$ 1/Meter
Request Sample
Diamond Member Since 2019

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

to see all verified strength labels (15)
  • IEC 0.6/1kv 2*50mm2 XLPE Insulation PVC Sheathed Power Cable
  • IEC 0.6/1kv 2*50mm2 XLPE Insulation PVC Sheathed Power Cable
  • IEC 0.6/1kv 2*50mm2 XLPE Insulation PVC Sheathed Power Cable
  • IEC 0.6/1kv 2*50mm2 XLPE Insulation PVC Sheathed Power Cable
  • IEC 0.6/1kv 2*50mm2 XLPE Insulation PVC Sheathed Power Cable
  • IEC 0.6/1kv 2*50mm2 XLPE Insulation PVC Sheathed Power Cable
Find Similar Products
  • Overview
  • Product Description
  • Certificates
  • Packing
  • International Fairs
Overview

Basic Info.

Model NO.
Power Cable
Sample
Provided
Advantages
Competitive Price
Transport Package
Wooden & Steel-Wooden Drums
Specification
aluminium
Trademark
HNBF Cable
Origin
Zhengzhou, China
HS Code
8544601900
Production Capacity
2500km/Month

Product Description

Product Description

These include low voltage and medium voltage SWA steel wire armour 3 core cable, and all sizes of these widely used armoured power cables with current ratings up to 33kV. For single core cables, aluminium wire armour - AWA - is used to prevent induced current in the armour. Armoured power cables are available with both copper and aluminium conductors as required. 

The armour provides additional protection where mechanical stress has the potential to cause damage to the cable, such as direct burial, outdoors or underground. The armour also enables the cable to withstand higher pulling loads. It should be noted, however, that the armour provides no protection for climatic conditions.

Armoured cables are often referred to as steel wire armoured cables, SWA cable, mains power cable, single core power cable, and multi-core booklet armoured cable. 
 

Type No. of Core Nominal cross-section
Type No. of Core Nominal cross-section
Cu(AL)/XLPE(PVC)/PVC(PE)
Cu(AL)/XLPE(PVC)/ATA/PVC(PE)Cu(AL)/XLPE/AWA/PVC(PE)
1 1.5-1000
Cu(AL)/XLPE(PVC)/STA/PVC(PE)
Cu(AL)/XLPE(PVC)/SWA/PVC(PE)
2,3,4,5 1.5-400
3+1,4+1,3+2 2.5-400

Cross-section area of neutral conductor
In 3+1cores and 3+2cores should conform to specification of following table
:
Nominal cross-section Main core 2.5 4 6 10 16 25 35 50
  Neutral core 1.5 2.5 4 6 10 16 16 25
Nominal cross-section Main core 70 95 120 150 185 240 300 400
  Neutral core 35 50 70 70 95 120 150 185

3. Characteristic
D.C Resistance of finished cable at 20ºC per km is not more than the following:
Nominal cross-section mm2 15 2.5 4 6 10 16 25
Cu core 12.1 7.41 4.61 3.08 1.83 1.15 0.727
Al core 18.1 12.1 7.41 4.61 3.08 1.91 1.20
Nominal cross-section mm2 35 50 70 95 120 150 185
Cu core 0.524 0.387 0.268 0.193 0.153 0.124 0.0991
Al core 0.868 0.641 0.443 0.320 0.253 0.206 0.164
Nominal cross-section mm2 240 300 400 500 630 800 1000
Cu core 0.0754 0.0601 0.0470 0.0366 0.0283 0.0221 0.0176
Al core 0.125 0.100 0.0778 0.0605 0.0469 0.0367 0.0291

Voltage test:
Each drum of finished cable should withstand power frequency voltage 3.5kV for 5 minutes,the insulation is not breakdown.
Service conditions and operation parameters of Cable:
The cable is applied to fixed installation for rated voltage 0.6/1kV of power transportation and distribution line.
Max. rated temperature of conductor. nominal operating 90ºC
Short circuit: max. for 5 sec.250ºC
The cable can be laid without drop restriction, and the environment temperature shall not be lower than 0ºC. 

4.Standard
Our XLPE cable can be manufactured according to to IEC 60502,IEC60332,IEC60754. 
Some indexes are superior to above international standard.
PS: we also can produce as per the BS, NFC, ASTM standard according to customer's request.

 
Certificates

IEC 0.6/1kv 2*50mm2 XLPE Insulation PVC Sheathed Power CableIEC 0.6/1kv 2*50mm2 XLPE Insulation PVC Sheathed Power Cable

Packing

 

IEC 0.6/1kv 2*50mm2 XLPE Insulation PVC Sheathed Power Cable
International Fairs

 

IEC 0.6/1kv 2*50mm2 XLPE Insulation PVC Sheathed Power CableWhy Choose Us

1. Strict quality control system, excellent quality with reasonable price.

2. Strong and professional R&D team to meet your specific needs.

3. Rapid delivery and feedback. Faster lead time than our competitors.

4. OEM service available based on offical & legal authorization.

5. Free sample is available.

6. Appointed shipping company is acceptable.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier